STH - Stand up PH CMS 70mm spacing

You will Recieve: 1 pair of Pan Hard Plates made of 2mm 6061 Aluminum, Spacers, Servo Mount, Hardware if Selected (2 - M3 Nylock, 2 - M3x16mm, 12 - M3x10mm)

Chassis Mounted Servos (CMS): You will have two options, Single Lay Down or Double Stand up. Both styles have an integrated Panhard Mount (PHM). If you plan to run a Chassis Mounted Servo Winch, you will need the Double Stand up mount. The Laydown Servo Mount only provides room for one servo. The slots on the side of the chassis allow for the CMS and PH to slide forward or backwards to align the PH more precisely to your axle position. Either of the servo mounts can work in both the front or rear positions of the chassis. Laydown CMS can prove to be difficult to configure depending on your drag link position and length of your servo horn. (Note: Excessive Shock travel can limit steering with a Laydown CMS)

Note: With Caiman UK1 this will require either an extra hole on the panhard side rail infront of the three or the rear panhard bar rail slot opening up to clearance the front of the shock tower dependant on your chosen panhard position.